UVINNECO UV-C Kinetic Reactor
2 items = -10%. The discount is applied automatically in the cart. Give better water to those who matter most.
1 Kinetic Reactor included and pre-installed. Recommended replacement approximately every 12 months.
A faucet attachment combining three advanced technologies: a UV-C/UVA diode (270–280 nm), the patented Kinetic Reactor and a microgenerator that draws its energy from the water flow.
- Neutralises up to 99.9% of bacteria, viruses and microorganisms
- Reduces chlorine and limescale by up to 70%, improving the taste and smell of water
- No filters and no chemicals. No batteries. Powered by water flow.
- 5 different adapters included for all types of standard faucets (M18–M24)
- Installation in about 3 minutes, no tools required
- 1 Kinetic Reactor included and pre-installed. Recommended replacement approximately every 12 months.
- 2-year warranty. Designed for long-term use.
UVINNECO is a stainless steel attachment that screws onto the thread of your existing tap in place of the aerator. It treats the water right before it leaves the tap - no batteries and no filter cartridges. Powered by water flow.
How it works
The water flow drives a built-in microturbine that powers the device. The water then passes through a UV-C/UVA diode (270–280 nm), which destroys up to 99.9% of bacteria, viruses and parasites, and through the Kinetic Reactor, which reduces chlorine and limescale and improves taste and odour. At the outlet, a swivel aerator (360°) softens the stream.
Reactor replacement
The Kinetic Reactor is the only part you replace - approximately once a year, in a few minutes and without tools. It comes pre-installed in the device; order a replacement when it is time for a change.
What you get in the box
-
UVINNECO attachmentwith a built-in Kinetic Reactor
-
5 different attachmentsM18–M24 and G½″ – for all types of standard taps
-
O-ring seal and instructionsfor tool-free installation
Performance
- Technologies
- UV-C/UVA sterilisation + Kinetic Reactor
- Effectiveness
- up to 99.9% of bacteria and viruses
- Chlorine and limescale
- reduced by up to 70%
- Power
- built-in micro-turbine, no batteries
- Flow rate
- ≈ 4 l/min
Build and installation
- Connection
- M18–M24 and G½″ (5 different attachments included)
- Material
- stainless steel, BPA-free
- Installation
- ≈ 3 minutes, no tools
- Reactor replacement
- 1x per year · pre-installed in the device
- Warranty
- 2 years on the device · made in the EU
- Dimensions
- 6.5 cm × 2.4 cm
Unscrew the aerator
Fit the adapter
If needed – M18–M24
Screw on UVINNECO
Turn on the water
Keep full performance.
Year after year.
A fresh Kinetic Reactor restores optimal flow and helps maintain full system performance. No filters, no cartridges and no tools.
- No tools
- Replacement in 5 minutes
- O-ring seal included
O-ring included Fast delivery across the EU 2-year warranty on the device
Suitable for all types of standard taps.
The box contains 5 different fittings for all types of standard taps. UVINNECO fits M18–M24 and G½″ threads. Select your thread size below and check which taps it is intended for.
- Small tapsM22 / M24 · low and narrow spouts
- Tall tapsM22 / M24 · high arc / gooseneck
- 360° swivel jointdirect the stream wherever you want
- Adjustable 25° tiltadjust the water outlet angle
Internal thread (female)
The thread is hidden inside the tap. An adapter with an external thread screws into it.
External thread (male)
The thread is on the outside of the tap. Use an adapter with an internal thread.
Set of 5 different attachments
5 different attachments are included for all types of standard taps – no extra purchase needed.
UVINNECO attachment
Reference thread M22. It screws directly onto most taps, otherwise use one of the 5 included attachments.
M18 – the smallest thread in the set
The narrowest standard aerator thread. You will mostly find it on narrow bathroom taps, on older models and on some designer taps with a slim spout.
- Which taps
Narrow bathroom taps, older and designer spouts
- Thread characteristic
Outer diameter 18 mm, fine thread pitch
- In the set
M22 male → M18 female and M22 male → M18 male
- Easy choice
If you are not sure, measure the thread diameter – M18 is the narrowest in the set.
M20 – the in-between size
Common on compact kitchen taps and mid-range bathroom fittings. It is hard to tell apart from M22 by eye, which is why both adapters are in the set.
- Which taps
Compact kitchen and bathroom fittings
- Thread characteristic
Outer diameter 20 mm, just 2 mm narrower than M22
- In the set
M22 male → M20 female and M22 male → M20 male
- Easy choice
If you are torn between M20 and M22, try M22 first – it is more common.
M22 – the most common European standard
By far the most widespread thread on kitchen taps in the EU. The tap usually has an internal (female) M22 thread with the old aerator screwed into it. In that case you screw UVINNECO on directly – no adapter.
- Which taps
Most standard kitchen taps in the EU
- Thread characteristic
Outer diameter 22 mm – the unit’s reference size
- In the set
No adapter needed; M24 female → M22 female is also available
- Easy choice
If you are not sure, start with M22 – it covers most taps in the EU.
M24 – taps with an external thread
The second most common standard. With M24 the thread is usually on the outside of the spout (male). The set includes two ball joints of this size, which allow adjustment as well as tilting the stream.
- Which taps
Taps with an external thread, often newer kitchen models
- Thread characteristic
Outer diameter 24 mm, thread on the outside
- In the set
Ball joint M24 female → M24 male and M24 female → M22 female
- Easy choice
If M22 does not fit, it is almost certainly M24.
G½″ – pipe (BSP) thread
An imperial BSP-standard thread, not metric. It is found on older, industrial and some imported taps. Because its pitch differs from metric, it cannot be screwed onto M22 without an adapter.
- Which taps
Older, industrial and imported fittings
- Thread characteristic
Imperial BSP thread (≈20.9 mm), different pitch than metric
- In the set
M22 female → G½″ male and M22 male → G½″ female
- Easy choice
If the thread is imperial, you need the G½″ adapter – a metric one will not catch.
Not sure which thread your tap has?Send us a photo of your tap and we will advise you which fitting you need.
Need help choosing?One attachment.
Five real benefits.
Proven to improve drinking water quality - without chemicals or filters. No batteries. Powered by water flow.
-
UV-C / UVA sterilisationNeutralises microorganisms directly in the water flow.
-
Eliminates up to 99.9% of bacteriaBacteria, viruses and parasites.
-
Reduces limescaleLess build-up on the tap and cookware.
-
Reduces chlorine in waterNo chemical aftertaste.
-
Improves smell and tasteFresher, more pleasant water.
Tested. Certified. European.
UVINNECO is developed in Slovenia and made from certified European materials. Every system is tested in independent laboratories and certified for your safety.
CE tested
of quality
Safe material
How do you replace the Kinetic Reactor cartridge?
5 minutes · no toolsTurn off the water
Shut off the water supply upstream of the UVINNECO system.
Remove the cartridge
Unscrew the system housing and remove the used Kinetic Reactor cartridge.
Insert the new cartridge
Insert the new Kinetic Reactor cartridge into the housing.
Screw on the housing
Screw the housing back onto the UVINNECO system – by hand, no tools.
Turn on the water
Turn on the water supply and the system is ready.
Why once a year?
The cartridge delivers billions of microgeneration reactions. After roughly 12 months of operation we recommend replacing it to maintain effectiveness. Regular replacement keeps the technology working consistently and provides maximum protection.
What is in the box?
-
Kinetic Reactor cartridgeThe same advanced UV-C and kinetic technology as in the original system.
-
O-ring sealFor a perfect, secure seal when screwing the housing back on.